skip to content

Kemloklar

To download a pdf, simply click the chosen item from the list above.

 

 

Cam and Groove Introduction

Cam and Groove Introduction

Cam and Groove Introduction

All Dixon's, Andrew's, Boss-Lock and EZ Boss-Lock Cam & Groove couplers and adapters are produced to interchange with all product produced to MIL-C-27487F. No standard exists for 1/2", 5" and 8" fittings, and generally these sizes do not interchange with other manufacturers.

Andrews's and Boss-Lock Cam and Groove Couplings do not interchange in the 8" size. (8" "Andrews" design has 4 cam arms).

DIN Standard Cam & Groove Couplers are produced in accordance with DIN2828. Dixon High Pressure / Sno-Lok couplings will interchange dimensionally with both MIL-C-27487 and DIN2828. Please note that high pressure / Sno-Lok couplings with Hose Tails are for use with Layflat hose. Couplings for Rubber Hose are available to special order. Dust Caps and Dust Plugs are NOT to be used in pressure applications for safety and environmental reasons.

Threads:
Male threads are either BSPT in accordance with BS21/DIN 2999 or NPT in accordance with ANSI/ASME B1.20.1

Female threads are either BSP PL. in accordance with BS2779/DIN ISO 228 or NPT in accordance with ANSI/ASME B1.20.1

Pressure Ratings for Dixon High Pressure / Sno-Lok Cam & Groove Couplings – 60 Bar all sizes with the exception of 2.5" x 2" Coupler (STD504) which is 100 Bar.

Pressure Ratings for Polypropylene Cam & Groove – 100 psi/7 Bar.

Note: All pressure recommendations are based on mating couplings at ambient temperature(70 deg.F/21 deg.C.).

Types

Andrews/Dixon

Boss Lock

EZ Boss Lock

Dixon Europe

Dixon Group Europe Ltd
350 Walton Summit Centre
Preston PR5 8AS England

Bizi bulmak için nasıl

Tel: +44 (0)1772 323529
Fax: +44 (0)1772 314664
enquiries@dixoneurope.co.uk

Coded with valid XHTML , CSS and tested for WCAG Priority 2 Conformance.