skip to content

Кулачковые соединения с пазами

Чтобы загрузить PDF, просто нажмите на выбранный элемент из списка выше.

 

 

Cam and Groove Introduction

Cam and Groove Introduction

Cam and Groove Introduction

All Dixon's, Andrew's, Boss-Lock and EZ Boss-Lock Cam & Groove couplers and adapters are produced to interchange with all product produced to MIL-C-27487F. No standard exists for 1/2", 5" and 8" fittings, and generally these sizes do not interchange with other manufacturers.

Andrews's and Boss-Lock Cam and Groove Couplings do not interchange in the 8" size. (8" "Andrews" design has 4 cam arms).

DIN Standard Cam & Groove Couplers are produced in accordance with DIN2828. Dixon High Pressure / Sno-Lok couplings will interchange dimensionally with both MIL-C-27487 and DIN2828. Please note that high pressure / Sno-Lok couplings with Hose Tails are for use with Layflat hose. Couplings for Rubber Hose are available to special order. Dust Caps and Dust Plugs are NOT to be used in pressure applications for safety and environmental reasons.

Threads:
Male threads are either BSPT in accordance with BS21/DIN 2999 or NPT in accordance with ANSI/ASME B1.20.1

Female threads are either BSP PL. in accordance with BS2779/DIN ISO 228 or NPT in accordance with ANSI/ASME B1.20.1

Pressure Ratings for Dixon High Pressure / Sno-Lok Cam & Groove Couplings – 60 Bar all sizes with the exception of 2.5" x 2" Coupler (STD504) which is 100 Bar.

Pressure Ratings for Polypropylene Cam & Groove – 100 psi/7 Bar.

Note: All pressure recommendations are based on mating couplings at ambient temperature(70 deg.F/21 deg.C.).

Types

Andrews/Dixon

Boss Lock

EZ Boss Lock

Dixon Russia

192174, г. Санкт-Петербург, Невский район, пр. Александровской фермы, д. 17, литер «А»

Как найти наc

Тел / Факс: +7(812) 6775447
info@dixonrussia.ru

Coded with valid XHTML , CSS and tested for WCAG Priority 2 Conformance.